Analysis Of Generator Structure

- Nov 10, 2017-

An ordinary type diesel generator set mainly consists of diesel engine, generator and control system composed of three parts, diesel engine and generator have two kinds of connection, one for the flexible connection, that is, with the coupling of the two parts of the docking, two for the rigid connection , With high-strength bolts to the generator steel connecting plate and diesel engine flywheel plate connected to the market, the use of rigid diesel generator sets are more rigid, diesel engine and generator connected after the installation of the public chassis, and then with A variety of protective sensors, such as water temperature sensors, through the sensor, intuitive to show the operation of the diesel engine to the operator, and with these sensors, you can set an upper limit, when reached or exceeded the limit Time control system will be pre-alarm, this time if the operator did not take measures, the control system will automatically stop the unit, diesel generator is to take this way from the role of self-protection. The sensor from the reception and feedback of the role of a variety of information, and truly display these data and the implementation of the protection function is the diesel generator control system, the control panel is generally installed in the generator, called the backpack control screen, there are some independent of a screen placed In the operating room, called the split control screen, the control panel through the cable and the generator and the sensor connection, respectively, electrical parameters and diesel engine operating parameters. In addition, the generating units are chassis, couplings, radiators, fuel tanks, and some also equipped with muffler and cover.